Torque measurement

CENTOR W Star with TH sensor

Most versatile torque gauge

Besides having all the functionalities of the CENTOR W Easy, the CENTOR W Star torque gauge provides handy further possibilities: the graphic display shows the full graph Torque = C(t).This gives you a general overview of the current test.The torque gauge is able to make several types of calculations on demand (break point, first peak, average, torque at time T, etc.).
It is equipped with a special sensor recognition system; this means that a single instrument can read different sensors (several capacities, Force
or Torque).
Furthermore, it is possible to freeze its configuration to
avoid handling errors.
It is the most versatile instrument yet designed for all
tests in industrial surroundings.
With TH “handle” sensor, low torque levels: used to measure low torque levels, screwing torque settings, or operating switches. The sensor is protected mechanically from overloads.

Specification Download
Information Request Form
FAQ

Technical characteristics

- Operates in Clockwise and anti-clockwise direction
- Accuracy 0.5% FS
- Resolution: 1/10 000 FS
- Peak function in both directions
- Simultaneous display of the peak and the current reading
- Display of the Torque/Time graph
- Calculations of specific points in the graph:
•Maxima
•Torque at time T
•Break point
•Derivative
•First peak
•Torque on opening/closing of contact
•Average torque
- Memorization of the last graph curve measured.
- Bar graph
- 3 units available: Nm, kg.cm, mNm
- Sampling rate 1 000 Hertz
- Can be used with a pedal
- Tare function
- Auto-off adjustable from 5 to 15 min, can be deactivated
- Programmable set point functions
- Two-way RS232 output: transmission of the current reading, minimum, peak or calculation
- Running transmission of 50 values per second
- Possibility of transmitting the graph curve memorized
- Digimatic output
- Memorization of 2 configurations
- current configuration Protection function (locking)
- Automatic recognition of additional sensors
- Reversible display
- Backlit display
- Operates on rechargeable batteries
- 8 hours of operation without recharging
- Fast charge
- Low battery indicator
- Metal casing with protective elastomer overmould
- Calibration certificate included
- Supplied in a carrying case with a mains adaptor

Models	Capacities (Torque)	Resolution (Torque)	Designation	Price
CNR SH 0.3	0.3Nm	0.03mNm	CENTOR Star torque gauge TH 0.3Nm	2495 €
CNR SH 1.5	1.5Nm	0.1mNm	CENTOR Star torque gauge TH 1.5Nm	2495 €
CNR SH 6	6Nm	0.6mNm	CENTOR Star torque gauge TH 6Nm	2495 €
CNR SH 12	12Nm	1mNm	CENTOR Star torque gauge TH 12Nm	2495 €