TWIST

To carry out a precise, repetitive torque measurement,
it is often necessary to use a torsion test
stand.
The TWIST, a 1 to 12 NM torsion test stand
with combined Torque/Angle measurement provides this function.
The torsion meter enables torsion tests to be made on various samples such as springs, or metal or plastic parts.
It is made up of a horizontal, rigid test stand, with two rails to provide precision guidance.
On the test stand, there are two working heads that are fitted with vertical circular plates.
Thanks to its ability to read two sensors at the same time and with a sampling rate of 1 000 Hertz, the CENTOR W Dual makes an ideal test console for the TWIST test stand.
Its calculating power enables it to record values coming from 2 different sensors simultaneously, monitor the set points and make a calculation for each channel.
On its display, it shows a Torque/Angle graph curve.
It provides the simplest, most versatile system for dealing with the most wide-ranging torsion tests in the workshop or in the laboratory.