|
- Simultaneous readings on 2 channels
- Operates in Tension and compression
- Accuracy 0.1% FS
- Resolution: 1/10 000 FS
- Peak function for tension and compression
- Simultaneous display of the peak and the current reading
- Display of the Force/Displacement graph
- Calculations of specific points in the graph for each channel:
•Maxima
•Force at time T
•Break point
•Derivative
•First peak
•Force on opening/closing of contact
•Average force
•Force for a given displacement
- Memorization of the last graph curve measured
- Bar graph
- 5 units available: N, kg, Lbs, g, Oz
- Sampling rate 1 000 Hertz
- Can be used with a pedal
- Tare function, separate on each channel
- Automatic tare possible at the beginning of the graph curve
- Auto-off adjustable from 5 to 15 min, can be deactivated
| - Programmable set point functions for each channel
- Full two-way RS232 output
- Running transmission of 25 value pairs per second
- Possibility of transmitting the graph curve memorized
- Digimatic output
- Memorization of 2 configurations
- Protection function for the current configuration
- Automatic recognition of additional force or torque sensors
- Recognition of incremental displacement sensors
(angular encoders or linear rulers)
- Reversible display
- Backlit display
- Sensor protected from overloads up to 200% of its capacity
- Operates on rechargeable batteries
- 8 hours of operation without recharging
- Fast charge
- Low battery indicator
- Metal casing with protective elastomer overmould
- Threaded fixing holes on the back for use on test stand
- Calibration certificate included
- Supplied in a carrying case with mains adaptor and set of accessories |
