This peeling table with a fixed 90° angle allows to measure the strength of the adhesives. During the tensile test, the table moves horizontally as the frame rises. This allows a constant angle to be maintained throughout the test.
The main standards that use this type of peeling table are as follows: ASTM-B571-Nr.11, EN28510, ISO 8510-1, ASTM-D2861-Fig.A, DIN EN1939 Fig.B1, ASTM-D3330,GOST-26246, ASTM-D6862, ASTM-D6252.
Technical Specifications :
- Capacity: 5 kN (1125 lbs))
- Maximum sample width: 50mm (1.97 in))
- Maximum sample length: 280mm (11.02 in)
- Material: Nickel-plated steel
- Temperature range: 0 - 70°C (32-158 °F)
- Weight: 5.4kg (11.905 lbs)
The peeling table includes the following elements :
- Sliding table
- Cable pull bar to be mounted on the sensor
- Cable
Note :
- The forceps for pulling the sample is not included. Several solutions are possible depending on the type of adhesive. To be ordered separately.
...
