S2 Load Cell from 10 to 1000N

search

SPIP S2 series square force load cells are automatically recognized by all the CENTOR TOUCH STAR and DUAL force gauges and torque gauges. They complete a set of force/torque measurements at a reasonable price. This type of load cell is ideal for general force measurement in tension and compression.

The sensor characteristics are stored in the memory of an electronic circuit located inside the sensor connector. When the CENTOR TOUCH STAR or DUAL instrument is switched on, the information is collected from the central memory and the instrument is automatically configured: it takes into account the type of sensor, its maximum capacity and its calibration data without the operator having to make any calibration adjustments.

Available capacities : 10, 20, 50, 100, 200, 500 and 1000N

From 1095 tax excl. €


Measuring direction
Tension and compression
Accuracy
0.1% of full scale
Resolution
1/10,000 of full scale
SPIP sampling rate
1 000 Hz
Net weight
0.5 kg
Load cell output
SPIP
Compatibility
Centor Touch, Stentor, T-Drive, Atlas
Material
Aluminum
Cable length
1.5 meter (up to 6 mèters on demand) / 5 ft (up to 20 ft on demand)

Download

You might also like

STENTOR II CC - Automated...
Quick view

STENTOR II CC - Automated Single column material testing

  • Multi-stages tester in tension and compression
  • 3 models: 1kN, 2kN, 5kN / 200lbs, 500lbs, 1,000lbs
  • Automatic recognition of load cell
  • Small tabletop footprint
  • Reliability and Traceability of your results
  • Sample height up to 445mm
From 7995 tax excl. €
T-DRIVE - Tensile test...
Quick view

T-DRIVE - Tensile test stand up to 20KN / 4,000 lbs

  • Simple high-capacity solution for tensile tests
  • 3 capacities : 5 kN, 10 kN and 20 kN / 1,000lbs, 2,000lbs and 4,000lbs
  • 3 travels : 500, 750 or 1000 mm  / 20in, 30in, 40in
  • Interchangeable sensors
  • Califort software included
From 11495 tax excl. €
ATLAS II CC - Automated...
Quick view

ATLAS II CC - Automated twin columns material testing

  • Twin-column multi-stages tester
  • Tension and compression
  • 3 models: 10kN, 20kN, 50kN
  • Automatic recognition of load cell
  • Large working area, hub 900mm
  • Califort software included
From 18995 tax excl. €