Andilog Technologies Logo
Andilog Technologies europe phone
Andilog Technologies usa phone
Andilog Technologies worldwide phone
  • Andilog Technologies contact
  • Andilog Technologies on facebook
  • Meet Andilog Technologies on Linkedin
  • Meet Andilog Technologies on Google Plus
  • Andilog Technologies French
  • Andilog Technologies German
  • Andilog Technologies English
Andilog search

Springtest 3 – Motorized spring tester

A destacar:
  • Automated tester
  • Stiffness calculation
  • Choice of load cell up to 2,000N / 500 lbs
  • Pre-configured package
  • Certificate of calibration included
  • youtube video
Springtest3 ressort evase

Main functions of the Springtest 3

The Springtest 3 model is our latest product development in our pre-configured packages. Based on the Stentor II test stand, it offers a distinct advantage in its advanced features and is a complete, all in one product. Designed to perform force testing on coil compression and tensile springs from 0 to 2.000 N (500 lbs), the Springtest 3 is a versatile and smart system designed specifically for testing in quality control, manufacturing, and R&D areas. 

  • Stiffness measurement in between two points
  • Force measurement at 1 or 2 displacement values
  • Displacement measurement at 1 or 2 force values
  • Load curve of springs
  • SPIP plug and play sensor technologies allowing to adapt several force load cells on the same model (capacity available to choose from 20 to 2.000 N / 5 to 500 lbs, accuracy 0.1% FS)
  • Internal memory of 2,000 values (or on a USB Datatstick II as an option)
  • Controled by Andilog’s Califort software (as option), designed to manage and automate the entire spring testing process


SpringTest3 Affichage


The front panel includes the latest Touch series technologies and provides users with a fast, one-step, colors coded results display.
Data is collected continuously offering real-time dual measurements and graphs, or 3 measurements (example: force, displacement and stiffness or the force at a displacement value and two other measurements).

An easy to use customizable measurement screen allows you to display required test results.


Affichage Springtest 3
Users configure measurements through simple and complete touch screens. The picture here shows an example of how
to configure the measurement of the spring's stiffness. Users specify the two values (spring height) in between which the force measurement have to be done.

The Springtest 3 model automatically calculates the spring rate according to the measured force at the two defined values.

Principales fonctions et types d'essais

Mechanical features of the frame:

The Springtest 3 model is available in two versions: 1.000 N or 2.000 N (200 or 500 lbs). The differences in those versions are:

  • 1.000 N version has a travel distance of 250mm (10 in) and a maximum height of 430mm
  • 2.000 N version has a travel distance of 350mm (14 in) and a maximum height of 530mm
  • Both versions are equipped with the SPIP plug and play sensor technologies allowing to adapt several force load cells on the same model, from 20 N to 2.000 N (from 5 lbs to 500 lbs)


Topload Les mesures

Self leveling platen

The Springtest 3 model comes with a 76mm (3 in) diameter self leveling platen. Mounted on a swivel system, the platen allows a fine adjustment of the parallelism between the compression platen and its support. This ensure accurate measurements of the applied force on the spring axis.

The adjustment procedure is easy: bring the compression platten in contact with the self leveling platen.


A clamping screw holds the platen in position for the duration of the entire test. Watch the video of the self leveling platen.

Topload Sauvegardes des résultats et connexion

The Springtest 3 model includes:


  • Stentor II motorized test stand
  • A force load cell with its SPIP technologies (capacity to choose between: 20 to 2.000N)
  • A 100mm diameter, top compression platen
  • A 76 mm diameter, self leveling platen
  • A force certificate of calibration linked to COFRAC/NIST

Options available:


  • Datastick II: Save your data and curve an a USB stick in one click
  • Touchconfig: A simple utility software to configure, load and save test setting
  • Califort: Manage and automate your entire spring testing process through this software
  • Fixtures: compression platen (100mm, 200mm), holding pins, tensile hook, safety guard….


Topload Capteur de force SPIP

Interchangeable, remote load cells

Springtest 3 testers are supplied with a highly accurate force load cell designed to provide repeatable results. The force accuracy is 0.1% of the load cell's capacity with a data acquisition rate of 1.000 Hz.

The force load cells are equipped with Plug and Play SPIP technology, which stores all their calibration parameters. You can swap out a load cell in accordance with your testing requirement; the load cell is automatically recognized by Andilog’s Springtest 3 testers.

    • Technical characteristics:
    • Accuracy of the force sensor: 0.1% FS
    • Data rate: 1,000 Hz
    • Force resolution: 1/10 000 FS
    • Resolution of the displacement: 0.02mm
    • Adjustable speed from 5 to 350 mm/min
    • Interchangeable force sensors
    • Power supply: 110V / 220V
    • Content of the Springtest 3:
    • Test stand Stentor II
    • Force sensor up to 2.000N / 500 lbs
    • Certificate of calibration linked to COFRAC / NIST
    • 76 mm diameter, Self leveling platen
    • 100 mm diameter, top compression platen,
    • User manual
  • youtube video

Clientes que se fían
de nosotros :

  • Volkswagen
  • Ferrari Racing
  • Schneider Electric
  • Wago
  • MDP
  • Renault
  • Scherdel
  • Rainbird
  • MGI Coutier
  • Ball Packaging
  • Hayden
  • Batelle
  • NIH
  • Thales
  • Airbus

Sobre Andilog

ANDILOG TECHNOLOGIES es una empresa francesa ubicada en Vitrolles al lado del aeropuerto de Marsella. Creada en 1986 en Boulogne, la compañía se especializa desde el inicio en la instrumentalización de la medición de la fuerza y del par. ANDILOG TECHNOLOGIES tiene una larga experiencia en la innovación en medida física. Con más de 20 años de experiencia y más de 1000 clientes en Francia y en el mundo, la cualidad y las funcionalidades de nuestros productos se ha enriquecido constantemente. Tenemos una larga serie de accesorios para el agarre, platos de compresión, ganchos de tracción, mandíbulas etc. para completar nuestra gama de productos y ofrecer soluciones para nuestros clientes en múltiples ámbito de aplicación como la electricidad, los resortes, el embalaje, sector del automóvil, ensayos de material, la metrología, la industria alimentaria, cosmética y médica.

Andilog Technologies ISO 9001:2008 Certified
ISO 9001:2008 Certified

Andilog Technologies – especialista en dinamómetros, torquímetros and y máquinas de ensayo Andilog Technologies Logo