Andilog Technologies Logo
Andilog Technologies usa phone
  • Andilog Technologies contact
  • Andilog Technologies on facebook
  • Meet Andilog Technologies on Linkedin
  • See our video on Youtube
  • Andilog Technologies French
  • Andilog Technologies German
  • Andilog Technologies Spanish
Andilog search

Anditork DUAL, for child-resistant caps

  • Designed for child-resistant caps
  • Measure torque and Force simultaneously
  • Live graphing
  • Calibration certificate included
Series code: ANDITORK DT
Availability Usually ships in 3-4 weeks
  • Documentation
  • 3D pdf
  • Plan

The Anditork DUAL model is specially designed to measure the pushing downward force, opening/closing torques for bottle's cap and the break torque of their safety ring. An advanced and unique solution, it's the perfect auditing equipment for child-resistant closures and complies with the regulations testing requirements.

The Anditork DUAL cap torque tester measures and displays simultaneously on one screen:

  •  the pushing force needed to operate the cap
  •  the break torque of the safety ring
  •  the peak torque of the cap closure

Torque measurements can be done by tightening or loosening it. The Andilog's cap torque tester is supplied with a grip plate that holds products from a diameter of 10mm to 200mm. The rubber-coated gripping fingers are adjusted quickly using a travel knob and are suitable to effectively grip a broad range of container shapes and sizes,

The Anditork DUAL series key features are:

  • measure force and torque values
  • fail / pass analysis thanks to its programmable set points
  • live graphing
  • color touch screen displaying: graph and 2 values to choose among: raw data, 1st peak, peak, average,...
  • memory up to 2000 results
  • statistical calculations
  • can be combined with an optional data acquisition software or USB stick memory DATASTICK

Thanks to its rechargeable batteries the ANDITORK models can be easily transferred between different control areas. The test can be run in the laboratory or even on the plant floor, and provides a quick quality control check.

Operating principles: The operating principle of the ANDITORK DUAL torque meter is straightforward. Operator places the sample on the platen of the cap torque meter, and manually by screwing the handle tights the four fingers around the sample. The test can start. The operator manually unscrews (or screws) the bottle’s cap and the reading is displayed in real time on the cap torque tester. Once the cap is unscrewed the sample can be released by un-tightening the four fingers and a new sample can be placed.

Supplied with:

  • Power cord
  • Calibration Certificate

Typical applications: Packaking industry, Beverage & Food industry, Medical & Pharmaceutical industry.


Series code: ANDITORK DT
Availability Usually ships in 3-4 weeks
  • Documentation
  • 3D pdf
  • Plan

Technical characteristics
Force and Torque
0.5% FS
Sampling rate
5000 hz
Overload protection
2000 Values
Bar Graph
N.m,,, mNm / N, Kg, Lb
Operate on rechargeable batteries
Low battery indicator
6Nm or 10Nm / 100N or 200N
Sample diameter
10mm to 200mm
Supplied with
Plate with gripping fingers
Display curve (torque/time)
Statistical features
USB Stick Memory compatible

DATASTICK II - Save your datas on USB stick

The system DATASTICK allows you to save you data on a USB stick in one click, whether you are doing your measurement indoor or outdoor on the field, we propose you a complete mobile solution. All data, results and curve are saved on your USB stick, no more needs of a computer.

Microtork, for measuring torque on small bottles

The Microtork is especially designed for small bottles, and it is equipped with a small grip plate whose fingers can be used to hold small containers. Available in Easy, Star and Dual Versions.

CALIGRAPH - Data acquisition and analyzing software for ANDILOG Centor series

CALIGRAPH is new, easy to use Windows based software that allows you to record, graph, analyze, store and report your tests results.


Related Products

Two chanels digital Force Gauge Centor Dual

Centor Dual, two-channels force display

Series code: CNR DT
Availability: Usually ships in 2-3 weeks
  • Reads two sensors simultaneously
  • Available sensor to choose from:
    • force, torque
    • linear or rotational displacement
  • Live graphing
  • Automatic calculations
  • New: Bluetooth communication
>>

Just a few of our partners

  • Bouygues Construction (France)
  • Cumins (USA)
  • Johnson Controls
  • Shimadzu (USA
  • Valéo (France)
  • Avinent (Spain)
  • Geneq (Canada)
  • SNCF (France)
  • Ball Packaging (Deutschland)
  • Hayden (USA)
  • Batelle (USA)
  • NIH (USA)
  • Thales (France)


ANDILOG TECHNOLOGIES is a recognized specialist for over 25 years in measuring instruments for force and torque applications in the industrial and research markets. We achieved this goal thanks to a culture of innovation and a strict quality policy. For each measurement case of force or torque, Andilog is creating an innovative and ergonomic solution. We offer measuring devices such as test benches, software, force and torque gauges, digital displays, manual and motorized test stands. We also have every possibility of calibration in force and torque in our laboratory. Our experience as a designer, a manufacturer and an integrator of portable force measuring systems allows us to offer integrated products into complete systems for assembly or manufacturing. All these products feature the latest technologies and are designed for ease of use by industry technicians, laboratory or research.

Andilog Technologies ISO 9001:2015 Certified Certificate #A529
ISO 9001:2015 Certified
Certificate #A529

ANDILOG TECHNOLOGIES, for force gauge, torque gauge and test stand A complete range of force measuring instruments

Andilog Technologies Logo