Andilog Technologies Logo
Andilog Technologies usa phone
  • Andilog Technologies contact
  • Andilog Technologies on facebook
  • Meet Andilog Technologies on Linkedin
  • See our video on Youtube
  • Andilog Technologies French
  • Andilog Technologies German
  • Andilog Technologies Spanish
Andilog search

Manual high capacity spring tester : Springtest T1

  • Tension and compression
  • High accuracy: 0.1% FS
  • Certificate of calibration included
  • Self leveling compression plate
Series code: SPRINGTEST T1
Availability Usually ships in 10 days
  • Documentation
  • Plan
  • 3D pdf
  • youtube video
Spring tester Springtest T1 with external sensor

Quick and precise control of springs

The SPRINGTEST T1 series is a very simple and economical system for checking compression springs in one point. The force gauge gives the force applied, the displacement sensor on the side shows the flexion or height measured under load. With its revolving hand crank, it is designed to perform tests from low capacity (10N) to high capacity (2.000N) with quick results.

For measurements over 1 kN or if you need a separate display, the test stand TEX555R can be equipped with an external load cell. It is compatible with all the force gauge of the product range Centor.

The manual test stand features a small footprint, durable design, portable and a digital travel display. Combined with our Centor force gauges, the Springtest T1 can measure any compression spring in production or laboratory for an affordable price.

Force gauge Centor Easy for the Springtest T1

Graphical force gauge Centor Easy

The force gauge Centor Easy is designed to meet the production needs of its users and offers indispensable feature for quality controls, such as: ease of reading with its large backlit graphical display, internal memory of the last 100 values, RS232 output and ability to set thresholds with visual and sound alarms. The M5 thread at the back of the device enables the mounting on the Springtest T1.

Its highly efficient measurement chain enables it to use a sampling rate of 1,000 Hertz with a resolution of 1/10,000 FS and a total error of less than 0.1% FS.

Key Features of the Centor Easy:

  • Fail/ Pass analysis (with beeping alarm)
  • Displays simultaneously real time and peak force values
  • Quick action lever handle (provided with 2 handles)
  • Small footprint and portable all in one measuring solution
  • 8 internal sensors available: 5N, 10N, 25N, 50N, 100N, 250N, 500N, 1 000N


Self-levelling plate

Self-leveling plate

This self-leveling compression platen adjusts the parallelism between the plate and the sample holder during measurements in compression. It can be used to test a large range of materials and particularly recommended when testing compression springs. With its locking screws, it enables to fix in position and ensures the parallelism with the compression platen during the measurement for a correct seating for the spring.

The diameter of the self-leveling plate is 76 mm and it is suitable for tests up to 2.000 N.

>> Watch the video of the self-leveling plate



Test stand TEX 555

How to perform your measurements with the Springtest T1

For the first measurement and regularly, it is necessary to ensure the parallelism between the compression platen and the self-leveling plate. Unlock the screws of the self-leveling plate and put the two platens in contact.

In order to reach the optimal precision of the Springtest T1 and to compensate the mechanical deformation of the system, we recommend applying the maximal force of your force gauge on the test stand. Once you have done this, tighten the screws of the leveling plate and tare the digital ruler.

This way you can test with great precision and lower deformation all of your springs. Place your springs on the Springtest T1, tare the force gauge and go down with the measuring head until you´ve reached the expected compression height and record the actual force indicated on the Centor Easy.



Supplied with:

  • Manual test stand TEX555
  • Digital ruler length: 150mm
  • Force Gauge Centor Easy with internal or external load cell
  • Compression platen Ø 50mm
  • Self-levelling plate Ø 80mm
  • Calibration certificate affiliated COFRAC
  • Power charger

Technical specifications:

  • Test stand suitable for forces up to 2 kN
  • Travel of the test stand: 175 mm
  • Travel distance for each rotation of the lever: 76 mm
  • Height between the table and the guiding system: 380 mm
  • Resolution of displacement: 0,01 mm
  • Dimension of the working table: 230 x 240 mm
  • Total height: 476 mm

With this model of SPRINGTEST it is possible to test the following springs: coil springs, spiral springs, wave springs, conical springs, volute springs, belleville springs, etc.

Typical applications: integration in valves, industrial machines, etc.

Series code: SPRINGTEST T1
Availability Usually ships in 10 days
  • Documentation
  • Plan
  • 3D pdf
  • youtube video

Technical characteristics
Force accuracy
0.1 % FS
Force resolution
1 / 10 000
150 mm
Displacement resolution
0,01 mm
Shipped with certificate of calibration

Related Products

Graphical Force Gauge Centor Easy

Centor Easy, graphical force gauge

Series code: CNR EA
Availability: Usually ships in 2-3 weeks
  • Large Screen
  • Accuracy 0.1 % FS
  • Capacities from 5N to 1000N / 1lb to 200lbs
  • Built-in memory for 100 trials
  • Certificate of calibration included
  • New Feature: PASS/FAIL analysis
>>
quick action manual test stand TEX 555 digtal ruler

TEX 555R, quick action manual test stand + digital ruler

Series code: TEX 555R
Availability: Usually ships in 10 days
  • High capacity up to 2000N
  • 150mm travel
  • Revolving hand crank for quick results
  • Displacement measurements
  • Travel resolution 0.01mm
>>
Self leveling plate

Self-leveling plate

Series code: AC PLAJ
Availability: Usually ships in 10 days
  • Static compression test
  • Up to 2000 N
  • Ensure parallelism
>>

Just a few of our partners

  • Bouygues Construction (France)
  • Cumins (USA)
  • Johnson Controls
  • Shimadzu (USA
  • Valéo (France)
  • Avinent (Spain)
  • Geneq (Canada)
  • SNCF (France)
  • Ball Packaging (Deutschland)
  • Hayden (USA)
  • Batelle (USA)
  • NIH (USA)
  • Thales (France)


ANDILOG TECHNOLOGIES is a recognized specialist for over 25 years in measuring instruments for force and torque applications in the industrial and research markets. We achieved this goal thanks to a culture of innovation and a strict quality policy. For each measurement case of force or torque, Andilog is creating an innovative and ergonomic solution. We offer measuring devices such as test benches, software, force and torque gauges, digital displays, manual and motorized test stands. We also have every possibility of calibration in force and torque in our laboratory. Our experience as a designer, a manufacturer and an integrator of portable force measuring systems allows us to offer integrated products into complete systems for assembly or manufacturing. All these products feature the latest technologies and are designed for ease of use by industry technicians, laboratory or research.

Andilog Technologies ISO 9001:2015 Certified Certificate #A529
ISO 9001:2015 Certified
Certificate #A529

ANDILOG TECHNOLOGIES, for force gauge, torque gauge and test stand A complete range of force measuring instruments

Andilog Technologies Logo