Andilog Technologies Logo
Andilog Technologies usa phone
  • Andilog Technologies contact
  • Andilog Technologies on facebook
  • Meet Andilog Technologies on Linkedin
  • See our video on Youtube
  • Andilog Technologies French
  • Andilog Technologies German
  • Andilog Technologies Spanish
Andilog search

Vertical torque tester - DRIVETORK CC

  • Designed for measuring screwing torque
  • Adjustable and regulated speed
  • Computer controlled
Series code: DRIVETORK CC
Availability Usually ships in 2-3 weeks
  • Documentation
  • 3D pdf
  • Plan
Controling measure screwing torque

Designed for measuring screwing torque

To measure torque accurately, it is necessary to regulate the test speed for repetitive results. The Drivetork, vertical torque bench makes it possible to perform torque measurements by avoiding the influence of an operator, thanks to regulated rotation at a constant speed.

The Drivetork torque tester allows you to test a variety of samples but it is particularly suited for screwing tests: caps, flasks, bottles, screws and nuts. Its measuring head has a transitional axis allowing you to move up and down freely during the torque measurements.

Main specifications of the Drivetork

Main specifications of the Drivetork

Vertical torque bench for measuring up to 12 Nm (100 in-lb). It can measure clockwise and counterclockwise.

Semi-automatic control by console or automatic by computer.

Speed range from 1 to 10 revolutions per minute. (other speeds available upon demand)

Range of accessories available for cap testing.

Its compact format and design is suitable for food or pharmaceutical production.

Instant Handling

Accurate measurement chain

The Drivetork is equipped with two high-precision sensors: a torque sensor and an angle sensor. These two sensors are perfectly aligned to guarantee the quality of the measurements in the sample axis.

The torque sensor is the sensitive element of the Drivetork. This sensor is available in different capacities depending on the measuring range on which it is used. The Drivetork can perform torque measurements from a few mNm (oz in) up to 12Nm (100 in-lb). These sensors are interchangeable and automatically recognized by the Drivetork. Therefore, it is possible to have several torque sensors to cover all measuring ranges. The accuracy of torque sensors is 0.5% of full scale. It is recommended to use them between 10% and 90% of their capacity.

The angle sensor: measures incrementally with a resolution of 0.1 °. Adjusted directly on the axis of rotation, it aligns perfectly with the sample to ensure an accurate measurement of the angle.

Souplesse d'utilisation

Data acquisition software Califort

Simply press the green arrow to start your test and measurements. There is no easier way to begin. User has access to the most important data and a limited access to the test configurations.

Califort’s menus have been redesigned for an ergonomic and more user-friendly experience, which minimizes the training time on the equipment.

Califort software offers and ensures integrity and traceability of your results, thanks to password protected access and automatic backup.

Drivetork plan

Technical specification:

  • Torque accuracy: 0.5% Full Scale
  • Data rate: 1,000 Hz
  • Angle resolution: 0.1deg;
  • Speed from 1 to 10 revolutions per minute
  • Measures clockwise and counter-clockwise
  • Sample height from 0 to 350 mm (13.7 in)
  • Screwing travel 75 mm (3 in)


  • Drivetork CC
  • One torque sensor
  • Power cord
  • Torque certificate of calibration
  • Califort software
  • Communication cable
  • Operating manual
Series code: DRIVETORK CC
Availability Usually ships in 2-3 weeks
  • Documentation
  • 3D pdf
  • Plan

Related Products

test software Califort

Califort material testing software

Series code: CALIFORT
  • Intuitive interface and adaptability
  • Edit and create customized test reports
>>

Just a few of our partners

  • Bouygues Construction (France)
  • Cumins (USA)
  • Johnson Controls
  • Shimadzu (USA
  • Valéo (France)
  • Avinent (Spain)
  • Geneq (Canada)
  • SNCF (France)
  • Ball Packaging (Deutschland)
  • Hayden (USA)
  • Batelle (USA)
  • NIH (USA)
  • Thales (France)


ANDILOG TECHNOLOGIES is a recognized specialist for over 25 years in measuring instruments for force and torque applications in the industrial and research markets. We achieved this goal thanks to a culture of innovation and a strict quality policy. For each measurement case of force or torque, Andilog is creating an innovative and ergonomic solution. We offer measuring devices such as test benches, software, force and torque gauges, digital displays, manual and motorized test stands. We also have every possibility of calibration in force and torque in our laboratory. Our experience as a designer, a manufacturer and an integrator of portable force measuring systems allows us to offer integrated products into complete systems for assembly or manufacturing. All these products feature the latest technologies and are designed for ease of use by industry technicians, laboratory or research.

Andilog Technologies ISO 9001:2015 Certified Certificate #A529
ISO 9001:2015 Certified
Certificate #A529

ANDILOG TECHNOLOGIES, for force gauge, torque gauge and test stand A complete range of force measuring instruments

Andilog Technologies Logo