Andilog Technologies Logo
Andilog Technologies usa phone
  • Andilog Technologies contact
  • Andilog Technologies on facebook
  • Meet Andilog Technologies on Linkedin
  • See our video on Youtube
  • Andilog Technologies French
  • Andilog Technologies German
  • Andilog Technologies Spanish
Andilog search

Springtwist, manual torsion torque tester

  • Display torque and angle
  • Designed to test torsion springs
  • High accuracy
  • Calibration certificate included
Series code: SPRINGTWIST
Availability Usually ships in 2-3 weeks
  • Documentation
  • Plan
  • 3D pdf
  • youtube video

Designed to measure torsion springs, the manual torque bench Springtwist is the solution to make your tests. Built with the latest measurement technologies, it can display on the same screen the values of torque, angle and curve of your tests. It can perform all your measurements with accuracy in your quality laboratory.

The Springtwist is supplied ready to measure with all the accessories needed for your tests: support for the spring, drive pins and plates for different sizes of springs.

This test bench is equipped with a high quality strain gauges torque sensor with a capacity up to 60 Nm and an accuracy of 0.5% of the full scale. Torque sensors lower capacities can be connected to the Springtwist for measurements on springs with small loads. These sensors are plug and play and do not require configuration of the device.

The extremely rigid frame is designed to ensure a perfect alignment between the two plates of twist to avoid measurement error. The positioning of the sensor is made using a ball screw to fit the width of the spring. The rotation is operated by a crank. Thanks to the important gear ratio between the crank and the plate, it is easy to perform repeatable measurements at an accurate angle.

The Springtwist comes with a certificate of calibration torque linked to COFRAC.

Series code: SPRINGTWIST
Availability Usually ships in 2-3 weeks
  • Documentation
  • Plan
  • 3D pdf
  • youtube video

Technical characteristics
Force accuracy
0.5 % FS
Force resolution
1 / 10 000
Space between plate
200 mm
Maximum diameter
100 mm
Angle resolution
0.1 °
Calibration certificate

Related Products

Torsion bench Twist

Twist, manual torsion bench

Series code: TWIST
  • Record torque and angle
  • Automatic calculations
  • Display the curve
  • Interchangeable torque sensors
>>

Just a few of our partners

  • Bouygues Construction (France)
  • Cumins (USA)
  • Johnson Controls
  • Shimadzu (USA
  • Valéo (France)
  • Avinent (Spain)
  • Geneq (Canada)
  • SNCF (France)
  • Ball Packaging (Deutschland)
  • Hayden (USA)
  • Batelle (USA)
  • NIH (USA)
  • Thales (France)


ANDILOG TECHNOLOGIES is a recognized specialist for over 25 years in measuring instruments for force and torque applications in the industrial and research markets. We achieved this goal thanks to a culture of innovation and a strict quality policy. For each measurement case of force or torque, Andilog is creating an innovative and ergonomic solution. We offer measuring devices such as test benches, software, force and torque gauges, digital displays, manual and motorized test stands. We also have every possibility of calibration in force and torque in our laboratory. Our experience as a designer, a manufacturer and an integrator of portable force measuring systems allows us to offer integrated products into complete systems for assembly or manufacturing. All these products feature the latest technologies and are designed for ease of use by industry technicians, laboratory or research.

Andilog Technologies ISO 9001:2015 Certified Certificate #A529
ISO 9001:2015 Certified
Certificate #A529

ANDILOG TECHNOLOGIES, for force gauge, torque gauge and test stand A complete range of force measuring instruments

Andilog Technologies Logo