Andilog Technologies Logo
Andilog Technologies usa phone
  • Andilog Technologies contact
  • Andilog Technologies on facebook
  • Meet Andilog Technologies on Linkedin
  • See our video on Youtube
  • Andilog Technologies French
  • Andilog Technologies German
  • Andilog Technologies Spanish
Andilog search

Variable Angle Peel Fixture

Highlights:
  • Adjustable angle
  • peeling test
Series code: ACC TABPEL
Availability
  • Documentation
  • 3D pdf
  • Plan
  • youtube video

Determine accurately the adhesive strength properties, with the variable angle peel test fixture from Andilog. The angle of peel can be adjusted in order to best simulate the line of pull that would be seen during normal use of the adhesive product. The peel fixture is used to measure the bond strength between laminated surface coatings and their rigid backings.

Specifications:

  • Platen: 73x120mm
  • Specimen Width:  0 to 50 mm
  • Specimen Length:  0 to 100 mm

The fixture platen is attached to the motorized test stand crosshead with cabling that ensures the sliding table movement is steady and independent of sample behaviors.
A coil spring is anchored on the back of the platen, to protect the measuring process from reacting to inertia caused by load peaks.
An upper vise grip, connected to the load cell, peeled the laminate from the backing structure
The motorized test stand is driven in tensile direction
The load cell monitors the peeling force and the tester display in real time the bond strength result. (Video available here)

Recommended with:
To initiate the peel test, the laminated surface is slightly peeled from the backing structure. We recommend to use a vise grip
Motorized test stand STENTOR II

Type of samples:  medical adhesives, various types of chemical adhesives tapes, bandages, secondary dressings, anti-shatter film, wound closure, sealed packaging, bond strength, inflexible adherents

Typical applications: medical devices, chemical industry, packaging and food industry

Series code: ACC TABPEL
Price
Availability
  • Documentation
  • 3D pdf
  • Plan
  • youtube video

Related Products

STENTOR II CC - Automated Single column material testing Automated Single column material testing
Highlights:
  • Multi-stages tester
  • Tension and compression
  • 3 models: 1kN, 2kN, 5kN
  • Automatic recognition of load cell
  • Small tabletop footprint
  • Reliability and Traceability of your results
Availability: Usually ships in 2-3 weeks

The Stentor CC is the most advanced version of the Andilog product range. It is designed to perform complex tensile & compression material testing,  in quality control, production or laboratory environments. Computer controlled it is the perfect equipment for your multi-stages tests and it guarantee reliability & traceability of your all test results very easily.

read more....read more...
Califort material testing software test software Califort
Highlights:
  • Intuitive interface and adaptability
  • Edit and create customized test reports

Califort Software is a sophisticated acquisition and analysis materials testing software, allowing reliable and repeatable results. For force and torque testing on all type of material, products and specimens, CALIFORT answer to your quality controls requirement and so it is the solution for today’s laboratory technicians and operators.

read more....read more...

Just a few of our partners

  • Bouygues Construction (France)
  • Cumins (USA)
  • Johnson Controls
  • Shimadzu (USA
  • Valéo (France)
  • Avinent (Spain)
  • Geneq (Canada)
  • SNCF (France)
  • Ball Packaging (Deutschland)
  • Hayden (USA)
  • Batelle (USA)
  • NIH (USA)
  • Thales (France)

Andilog

ANDILOG TECHNOLOGIES is a recognized specialist for over 25 years in measuring instruments for force and torque applications in the industrial and research markets. We achieved this goal thanks to a culture of innovation and a strict quality policy. For each measurement case of force or torque, Andilog is creating an innovative and ergonomic solution. We offer measuring devices such as test benches, software, force and torque gauges, digital displays, manual and motorized test stands. We also have every possibility of calibration in force and torque in our laboratory. Our experience as a designer, a manufacturer and an integrator of portable force measuring systems allows us to offer integrated products into complete systems for assembly or manufacturing. All these products feature the latest technologies and are designed for ease of use by industry technicians, laboratory or research.

Andilog Technologies ISO 9001:2015 Certified
ISO 9001:2015 Certified

ANDILOG TECHNOLOGIES, for force gauge, torque gauge and test stand A complete range of force measuring instruments

Andilog Technologies Logo
-->