Andilog Technologies Logo
Andilog Technologies usa phone
  • Andilog Technologies contact
  • Andilog Technologies on facebook
  • Meet Andilog Technologies on Linkedin
  • See our video on Youtube
  • Andilog Technologies French
  • Andilog Technologies German
  • Andilog Technologies Spanish
Andilog search

Motorized wire tester : WIRETEST 2

Highlights:
  • Easy to use
  • Automatic tester
  • Pre-configured package
  • Certificate of calibration included
Series code: WIRETEST 2
Availability Usually ships in 2-3 weeks
  • Documentation
  • 3D pdf
  • Plan

The WIRETEST 2 motorised wire pull tester is designed to test the quality of terminals connections in place. The success of a connection is related to the quality of the setting tools and the proper adjustment of the setting machines. Because these settings tend to evolve over the course of production, it is essential to check them regularly.


Measuring the force needed to pull out the connections is a quick and easy step that very clearly shows the condition of the setting. Several aeronautic, automotive or railway standards define the test conditions: minimum acceptable forces depending on the diameter of the cable, tension rates, etc.

WIRETEST 2 meets all those conditions. Thanks to its control console, the operator selects the settings for the tension rates, the return speed and the automatic return to the starting position. The force gauge displays the current values and the pull-out force.

These results can either be stored in the memory (up to 2000 values) or even transferred to a computer. Designed for use in the production workshop, the WIRETEST 2 guarantees a faultless wiring. Maximum force 2,000 N, displacement length 300 mm, maximum length of samples 400 mm, sold with a carousel for terminals and a self-closing wedge clamp.

Operating principles: The force is applied on tension pulls

  • Cut wire length and strip one end
  • Clamps the wire to the wire end (no grip on the insulation of the wire)
  • Install the terminal into the rotational crimp fixture
  • Pulls at a set speed, i.e., 2.00” per minute – 50mm/min
  • Force measurements are displayed in real time with live graphing
  • Pull force reading can be recorded on a USB memory stick with the DATASTICK option and compared using the Material testing software CALIFORT

Typical applications: wiring test, crimped wire terminal strength test, electrical harness terminal testing.

Series code: WIRETEST 2
Price
Availability Usually ships in 2-3 weeks
  • Documentation
  • 3D pdf
  • Plan
Shipping:

Technical characteristics
Force accuracy
0.5 % FS
Force resolution
1 / 10,000
Travel
300 mm
Max wire diameter
5 mm
Shipped with certificate of calibration
Yes
Max sample length
400 mm

Related Products

STENTOR II - Standalone Force tester Motorized test stand Stentor
Highlights:
  • Capacity up to 5 000 N (1 000 lb)
  • Autonomous force measuring system
  • Color Touch screen with display force vs. displacement
  • Automatic load cell recognition with SPIP technology
Availability: Usually ships in 3-4 weeks

Motorized single column testing systems, STENTOR II, design for tension and compression testing for quality control and general purpose mechanical testing.

read more....read more...
Wire terminal carrousel for force gauge 1000 N Wire terminal carousel small capacity for force gauge - 200 lb
Highlights:
  • Terminal carousel
  • Capacity 1000 N
Availability: Usually ships in 10 days

Rotating terminal fixture, fited with numerous slots of regularly increasing sizes, this accesory holds assembled terminals and stands up to a crimping force of 1000 N

read more....read more...
CALIGRAPH - Data acquisition and analyzing software for ANDILOG Centor series data graphing software caligraph
Highlights:
  • User-friendly intuitive user interface for fast start
  • Display of the curve in real time for force and torque gauges
  • Automatic pre-defined calculations: maximum, break, average
  • Creation of personalizable test reports
  • Permanent updates and support

CALIGRAPH is new, easy to use Windows based software that allows you to record, graph, analyze, store and report your tests results.

read more....read more...

Just a few of our partners

  • Bouygues Construction (France)
  • Cumins (USA)
  • Johnson Controls
  • Shimadzu (USA
  • Valéo (France)
  • Avinent (Spain)
  • Geneq (Canada)
  • SNCF (France)
  • Ball Packaging (Deutschland)
  • Hayden (USA)
  • Batelle (USA)
  • NIH (USA)
  • Thales (France)

Andilog

ANDILOG TECHNOLOGIES is a recognized specialist for over 25 years in measuring instruments for force and torque applications in the industrial and research markets. We achieved this goal thanks to a culture of innovation and a strict quality policy. For each measurement case of force or torque, Andilog is creating an innovative and ergonomic solution. We offer measuring devices such as test benches, software, force and torque gauges, digital displays, manual and motorized test stands. We also have every possibility of calibration in force and torque in our laboratory. Our experience as a designer, a manufacturer and an integrator of portable force measuring systems allows us to offer integrated products into complete systems for assembly or manufacturing. All these products feature the latest technologies and are designed for ease of use by industry technicians, laboratory or research.

Andilog Technologies ISO 9001:2015 Certified
ISO 9001:2015 Certified

ANDILOG TECHNOLOGIES, for force gauge, torque gauge and test stand A complete range of force measuring instruments

Andilog Technologies Logo
-->