Andilog Technologies Logo
Andilog Technologies usa phone
  • Andilog Technologies contact
  • Andilog Technologies on facebook
  • Meet Andilog Technologies on Linkedin
  • See our video on Youtube
  • Andilog Technologies French
  • Andilog Technologies German
  • Andilog Technologies Spanish
Andilog search

Manual spring tester : Springtest 1

Highlights:
  • Easy to use
  • High accuracy: 0.1%
  • Tension and Compression
  • Certificate of calibration included
  • Self levelling compression plate
Series code: SPRINGTEST 1
Availability Usually ships in 10 days
  • Documentation
  • 3D pdf
  • Plan
  • youtube video
BAT1000 precision manual force test stand

Precise verification of springs with display of the force and displacement

The Springtest 1 is a very simple and economical system to control compression springs of small capacity up to 1 kN. It includes a very accurate force gauge, a manual test stand, a digital ruler and a special compression plate for springs.

The measuring head (internal load cell with strain gauges) indicates the force applied, the ruler displays the deflection or the height under load. The bottom self levelling plate guarantees the parallelism of the plates. The system Springtest 1 is very easy to use and it is designed to perform your measurements quickly. The quality and repeatability of the results are ensured through a specific design made by Andilog Technologies.

The manual test stand features a small footprint, durable design, portable and a digital travel display. Combined with our Centor force gauges, the Springtest 1can measure any compression spring in production or laboratory for an affordable price.

Centor Easy, graphical force gauge

Graphical force gauge Centor Easy

The force gauge Centor Easy is designed to meet the production needs of its users and offers indispensable feature for quality controls, such as: ease of reading with its large backlit graphical display, internal memory of the last 100 values, RS232 output and ability to set thresholds with visual and sound alarms. The M5 thread at the back of the device enables the mounting of on the wire tester Wiretest T1.

Its highly efficient measurement chain enables it to use a sampling rate of 1,000 Hertz with a resolution of 1/10,000 FS and a total error of less than 0.1% FS.

Key Features of the Centor Easy:

  • Fail/ Pass analysis (with beeping alarm)
  • Displays simultaneously real time and peak force values
  • Quick action lever handle (provided with 2 handles)
  • Small footprint and portable all in one measuring solution
  • 8 internal sensors available: 5N, 10N, 25N, 50N, 100N, 250N, 500N, 1 000N

 

Self-leveling plate

Self-leveling plate and compensate for distortions

During the first use and periodically, it is necessary to adjust the parallelism between the compression plate and the self levelling plate. To do this, loosen of the self-levelling plate and go down with the compression plate to bring together the two plates. To ensure even greater accuracy and compensate for distortions in the system, it is recommended to apply a force between two plates equivalent to the force measured on your springs. Once this force is reached, lock the self levelling plate by tightening the screws. Then press zero on the displacement sensor.

You can then test all your springs. Simply place the spring on the Springtest 1, then turn the handle to go down with the force gauge to have the desired height. Write then the value of the force or transfer this value to your computer.

>> Watch the video of the self-leveling plate


 

 

Bati manuel pour dynamometre

Principle of operation:

  • The force gauge with its internal load cell, Centor Easy model, measures the compression force of the spring. The compression force in Newton (or Kg, gr, lb, oz) is displayed on the force gauge.
  • The displacement value is measured and displayed on the linear ruler located on the side of the manual test stand (in mm or inch).
  • The test stand is hand operated, thanks to its wheel-handle, with a displacement of 2.54mm (0,1 inch) per revolution.
  • The spring is installed between the top compression platen and the bottom self-leveling compression platen.
  • To initiate a test, the handle-wheel is manual operated. The upper compression platen that is connected to the force gauge is then driven in the compression direction and spring is pressed. the force required to compress the sample is monitored by the force gauge, providing a direct measurement of the raw data and maximum force.

 

 

 

Supplied with:

  • Manual test stand BAT1000
  • A digital ruler
  • Force gauge Centor Easy with an internal precision load cell
  • 50mm diameter compression plate
  • Self-leveling plate diameter 76mm - AC PLAJ
  • Calibration certificate affiliated COFRAC
          Hooks can be supplied as an option for tensile springs.

Technical specifications:

  • Test stand suitable for forces up to 1 kN
  • Travel of the test stand: 300 mm
  • Travel distance for each rotation of the crank handle: 2,54 mm
  • Resolution of displacement: 0,01 mm
  • Dimension of the working table: 230 x 240 mm
  • Total height: 577 mm
Series code: SPRINGTEST 1
Price
Availability Usually ships in 10 days
  • Documentation
  • 3D pdf
  • Plan
  • youtube video
Shipping:

Technical characteristics
Force accuracy
0.1 % FS
Force resolution
1 / 10 000
Travel
200 mm
Displacement resolution
0,01 mm
Shipped with certificate of calibration
Yes

Related Products

Manual high capacity spring tester : Springtest T1 Springtest T1, high capacity manual spring tester
Highlights:
  • Tension and compression
  • High accuracy: 0.1% FS
  • Certificate of calibration included
  • Self leveling compression plate
Availability: Usually ships in 10 days

The SPRINGTEST T1 series is a very simple and economical system for checking compression springs in one point. The force gauge gives the force applied, the displacement sensor on the side shows the flexion or height measured under load.

read more....read more...
Centor Easy, graphical force gauge Graphical Force Gauge Centor Easy
Highlights:
  • Large Screen
  • Accuracy 0.1 % FS
  • Capacities from 5N to 1000N / 1lb to 200lbs
  • Built-in memory for 100 trials
  • Certificate of calibration included
  • New Feature: PASS/FAIL analysis
Availability: Usually ships in 2-3 weeks

The Centor Easy digital force gauge is designed to meet the production needs of its users. This force tester offers several features which are indispensable today for quality control : internal memory, high accuracy, RS232, and thresholds.

read more....read more...

Just a few of our partners

  • Bouygues Construction (France)
  • Cumins (USA)
  • Johnson Controls
  • Shimadzu (USA
  • Valéo (France)
  • Avinent (Spain)
  • Geneq (Canada)
  • SNCF (France)
  • Ball Packaging (Deutschland)
  • Hayden (USA)
  • Batelle (USA)
  • NIH (USA)
  • Thales (France)

Andilog

ANDILOG TECHNOLOGIES is a recognized specialist for over 25 years in measuring instruments for force and torque applications in the industrial and research markets. We achieved this goal thanks to a culture of innovation and a strict quality policy. For each measurement case of force or torque, Andilog is creating an innovative and ergonomic solution. We offer measuring devices such as test benches, software, force and torque gauges, digital displays, manual and motorized test stands. We also have every possibility of calibration in force and torque in our laboratory. Our experience as a designer, a manufacturer and an integrator of portable force measuring systems allows us to offer integrated products into complete systems for assembly or manufacturing. All these products feature the latest technologies and are designed for ease of use by industry technicians, laboratory or research.

Andilog Technologies ISO 9001:2015 Certified
ISO 9001:2015 Certified

ANDILOG TECHNOLOGIES, for force gauge, torque gauge and test stand A complete range of force measuring instruments

Andilog Technologies Logo
-->