- 7 available capacities from 10 to 1000N (2 to 200lbs)
- Compact dimensions & Lightweight
- IP67
- Accuracy 0.1%
- Automatically recognized by Centor Touch
- Calibration certificate included
Ergokit Touch Star - Advanced ergonomy kit
Excessive forces, repetitive shock and high pressures have been identified as contributors to traumatic and overuse injuries. Therefore, ANDILOG develops the ERGOKIT product line in order to measure the forces occur by the body during various activities and can be used in order to conduct ergonomic analysis. The ERGOKIT product line measure with high accuracy the force load requires by the human body to perform a work tasks i.e.; lifting, pushing, pulling, moving things around, gripping…
The Ergokit Touch is the most complete system for your ergonomic analyses, displaying the curve in real time with 2 calculations, e.g. average force (rolling effort), force at a given time, peak (starting effort), break etc... Up to 2000 values can be stored in the device's internal memory.
Available capacities : 500 and 1000N / 100 and 200 lbs
- Measuring direction
- Tension and compression
- Accuracy
- 0.1% of full scale
- Resolution
- 1/10,000 of full scale
- Internal load cell sampling rate
- 5,000 Hz
- Autonomy
- 8 hours
- Units
- N, kN, lb, kg, Oz, daN, g
- Display
- Color, touchscreen
- Display type
- 3 lines or 2 lines + curve
- Data memory
- 2,000 results
- Communication
- RS232 and USB
- Overload protection
- 150% of full scale
- Auto-off
- Adjustable from 5 to 15 minuts, can be desactivated
- Country of origin
- France
- HS code
- 9024 80 00
You might also like
Handle torque sensor with chuck
- For static torque applications
- Capacities from 0,3 Nm to 12Nm
- Supplied with chuck grips up to 10mm
- 3/8'' square tool-holder
DATASTICK II - Save your datas on USB stick
- Data saved on USB flash drive
- Smart memory recorder for real testing on the field experiences
- Software included (analysis and report)
- Records your curve and results
Caligraph - Data acquisition and analyzing software for Centor series
- User-friendly intuitive user interface for fast start
- Display of the curve in real time for force and torque gauges
- Automatic pre-defined calculations: maximum, break, average
- Creation of personalizable test reports
- Permanent updates and support