Andilog Technologies Logo
Andilog Technologies usa phone
  • Andilog Technologies contact
  • Andilog Technologies on facebook
  • Meet Andilog Technologies on Linkedin
  • See our video on Youtube
  • Andilog Technologies French
  • Andilog Technologies German
  • Andilog Technologies Spanish
Andilog search

Centor Dual, two-channels force display

Highlights:
  • Reads two sensors simultaneously
  • Available sensor to choose from:
    • force, torque
    • linear or rotational displacement
  • Live graphing
  • Automatic calculations
  • New: Bluetooth communication
Series code: CNR DT
Availability Usually ships in 2-3 weeks
  • Documentation
  • 3D
  • Plan
Advanced force gauge Centor Dual Touch

Working principle of the Centor Dual Touch

Thanks to its ability to read two sensors simultaneously, the Centor Touch Dual is a true test console designed for advanced force testing. It offers all the functionality of an efficient force gauge and its calculating power enables it to save values from two different sensors simultaneously and perform calculations on each channel. This way you can read the values of two sensors of force, torque, displacement and/or angle.

This force gauge is equipped with a force sensor when manufactured. This load cell can be either mounted in the housing (capacities from 5 N to 1.000 N) or outside of the housing with a cable (capacities from 5 N up to 50 kN). This load cell cannot be dismantled from the display. The Centor Dual Touch is also equipped with a SPIP input which permits the automatic reading and recognition of any sensor equipped with this technology.

The different sensors available are: force, torque, rotational displacement and linear displacement.

Display of the curve on the Centor Dual Touch

Main features of the Centor DUAL Touch

The main fonctions of the Centor Dual Touch are:

  • Memory: 2000 values
  • Automatic calculations of the maximum and minimum
  • Live graphing:
    • Sensor 1 vs Sensor2
    • Sensor 1 vs time
    • Sensor 2 vs time
    • Sensor 1 & 2 vs time
  • Color touch screen
  • Display 3 measurement lines

The advanced features of the Centor DUAL Touch are:

  • Pre-defined calculation: Break force, Speed, Average Force i.e. peeling of friction tests etc. (see below for the detailed list)
  • Threshold points with Pass/Fail analysis (visible and beeping alarm)
  • Compatible with all our force and torque SPIP sensors (plug and play technologies)
  • Statistical features
  • Compatible with the USB stick data recorder DATASTICK and BLUETOOTH dongle

 

Calculs disponibles sur le Centor Dual Touch

Available pre-defined calculations

  • Break force
  • Average
  • Average in a time window
  • 1st Peak
  • Peak
  • Peak in a time window
  • Speed
  • Value of Sensor 1 vs Sensor 2 (i.e. Force value at 10mm of travel displacement)
  • Force at time
  • Time to reach force value
  • Force to close a contact (switches, push-buttons, contact)
  • Moving average

 

Graphical interface of the Centor Dual Touch

An user friendly interface

The force gauge Centor Dual Touch has been designed for measurements in an industrial environment. It offers high performance with a great simplicity of use thanks to its digital, colour touch screen.

The icons in the menus guide the user in the configuration of its tests. The setup, messages and results are available in English, French, German and Spanish.

Input and output of the Centor Dual Touch

Input/ Output

For a better integration the the manufacturing process and the communication with other devices, the force gauge Centor Dual Touch is equipped with digital and analogical inputs and outputs. These are available on the 26 points connector located at the side of the gauge.
The inputs and outputs are:
  • Bluetooth - With the Bluetooth module (sold separately), you can remove the connection cable between the computer and the gauge.
  • USB data recorder - With the USB Datastick II (sold separately), you can now save all your measurements and graph directly to a USB memory without connecting to a computer.
  • RS232 and USB: 2 modes of operation:
    • Continuous: sending data continuously at an adjustable speed up to 100Hz or
    • On demand: data transmission request from a computer to retrieve the device memory or tare.
  • Analog: sending data continuously at 100 Hz with a voltage of +/- 1.25V.
  • TTL: Interfaces your gauge with a PLC - The Centor Touch Dual model can easily be integrated to an industrial assembly line thanks to its programmable TTL 6 outputs and 2 inputs. Industrial robots are controlled by automate using triggers signals which can be generated through the digital ports of the Centor Touch Dual.
Torque sensors from Andilog

Easily swap load cells

Thanks to its advanced features, you can swap load cells by simply disconnecting one cell and fitting another. When a new loadcell is connected, the Centor Touch Dual automatically recognizes it (reading the new cell's range, serial number and calibration status). It is the simplest and most complete scalable system for approaching tests in a workshop or laboratory.

Our range of force sensors
Our range of torque sensors

The full functionalities, the flexibility and the user-friendliness of the Centor Dual Touch makes it the ideal solution in the workshop, for quality controls or for simple as for sophisticated tests, available at an affordable price!

    • Supplied with:
    • Centor Touch Dual Gauge
      The sensor of your choice
      Carrying case
      Power charger
      Certificate of calibration
      Operating manual
    •  
  •  
Series code: CNR DT
Price
Availability Usually ships in 2-3 weeks
  • Documentation
  • 3D
  • Plan
Shipping:

Technical characteristics
Tension and compression
Yes
Accuracy
0.1 % FS
Resolution
1 / 10,000
Sampling rate
1000 Hz
Peak in tension and compression
Yes
Auto-off
Adjustable from 5 to 15 min
Reversible display by software
Yes
Overload protection
200 %
Calibration certificate included
Yes
Metal casing and protective elestomere overmould
Yes
Bargraph
Yes
Units
N, lb, kg, g, oz
Display peak and current value in the same time
Yes
Tare function
Yes
Use of a Foot pedal
Yes
Programable set point
Yes
Internal memory
Yes
Statistics on 100 tests
Yes
RS232 output
Yes
Digimatic and analogic output
Yes
Backlight display
Yes
Display curve (force/time)
Yes
Automatic calculations
Yes
Memory card reader compatible
Yes
Automatic recognition of additionnal load cells
Yes
Simultaneous reading of two chanels
Yes
Recognition of displacement sensors
Yes
Operate on rechargeable battery
Yes
Low battery indicator
Yes
Battery life
8 hours
Supplied with
hook, Ø 19 mm plate, extension rod

Related Products

subminiature load button LLB35

Subminiature remote load button

Series code: SPIP LLB350
Highlights:
  • Available capacities: 100N (25lb), 200N (50lb)
  • Threaded mounting holes
  • Used in compression only
  • Accuracy 0.5% FS
  • Calibration certificate included
>> read more...
capteur force filetage

Threaded load cell for Centor Star and Dual series - U9C

Series code: SPIP U9C
Availability: Usually ships in 2-3 weeks
Highlights:
  • Available capacities from 50 N to 5 kN
  • Automaticaly recognized by Centor Touch Star or Dual
  • Both Compression and tension
  • Miniature design
  • Double male threads
  • Accuracy 0,5% FS
  • Calibration certificate included
>> read more...
Handle torque sensor SPIP TH

Handle torque sensor for Centor Star & Dual

Series code: SPIP TH
Availability: Usually ships in 2-3 weeks
Highlights:
  • static Torque application
  • From 0,3 Nm to 12Nm
  • Supplied with chuck grips
>> read more...

Just a few of our partners

  • Bouygues Construction (France)
  • Cumins (USA)
  • Johnson Controls
  • Shimadzu (USA
  • Valéo (France)
  • Avinent (Spain)
  • Geneq (Canada)
  • SNCF (France)
  • Ball Packaging (Deutschland)
  • Hayden (USA)
  • Batelle (USA)
  • NIH (USA)
  • Thales (France)

Andilog

ANDILOG TECHNOLOGIES is a recognized specialist for over 25 years in measuring instruments for force and torque applications in the industrial and research markets. We achieved this goal thanks to a culture of innovation and a strict quality policy. For each measurement case of force or torque, Andilog is creating an innovative and ergonomic solution. We offer measuring devices such as test benches, software, force and torque gauges, digital displays, manual and motorized test stands. We also have every possibility of calibration in force and torque in our laboratory. Our experience as a designer, a manufacturer and an integrator of portable force measuring systems allows us to offer integrated products into complete systems for assembly or manufacturing. All these products feature the latest technologies and are designed for ease of use by industry technicians, laboratory or research.

Andilog Technologies ISO 9001:2015 Certified Certificate #A529
ISO 9001:2015 Certified
Certificate #A529

ANDILOG TECHNOLOGIES, for force gauge, torque gauge and test stand A complete range of force measuring instruments

Andilog Technologies Logo
-->